RaleighBurner.com

Superkav · Last edited by Superkav on Wed Oct 04, 2006 8:49 pm; edited 5 times in total

**The following colours and codes are all valid for both powder coating and spray painting but are listed here with the intention of using powder coating and are therefore marked with (HG) for High Gloss finish, (M) for Matt finish and (SG) for Semi-Gloss**

Blue
Signal Blue, colour code RAL5005 (HG) Team colours, MkI Tuff Burner, MkI Blue Burner and Blue Mini Burner
**Update** Peugot Royal Blue available from Halfords in spray cans is an EXACT match to RAL5005. Just used it on my Team Pro to prove the point.**Update**

Red Two reds to choose from, one slightly darker than the other.
Traffic Red, colour code RAL3020 (HG) Lighter red
Signal Red colour code RAL3001 (HG)Darker red MkI Extra or MkI Red Burner or Red Mini Burner

Superchrome
Code unknown MkI & II Night Burner, Super Burner and Super Tuff Burner all have a Superchrome finish in Black and Gold respectively
Currently available from http://www.aerocoat.net/ also available Gold Superchrome from Impreziv Finishing Ltd Co Durham, Contact Mark on 01325 489899

Black
Jet Black, colour code RAL9005 (HG) Black Burner and Ultra Burner
Jet Black, colour code RAL9005 (SG) MKI Burner, Super and Tuff Burner forks

Yellow
Traffic Yellow, colour code RAL1023 Yellow Styler

White
Pure White, colour code RAL9010 Team Burner, Mag Burner

Comparisons

Please add any updates/corrections below and I'll update them
Cheers
Superkav
_________________
'Tomato - Ted - aubergine - your - potato - wife's - turnip - dead.'

DaveMac · Posted: Thu Oct 27, 2005 1:44 pm Post subject:

Isn't the white listed as "Bright White" ???

I think that was what I had my MKII Mag Burner coated with.
_________________
http://www.burnerworld.co.uk/

jezza · Posted: Thu Oct 27, 2005 1:59 pm Post subject:

Good site for all the colours of RAL

http://www.martindoor.com/188_ral.htm

print on gloss paper and your away...white is a strange one to print though Confused

_________________

Superkav · Posted: Thu Oct 27, 2005 2:00 pm Post subject:

There's Signal White RAL9003 & Pure White RAL9010 but I've never used them so I can't be sure which is the whitest.
_________________
'Tomato - Ted - aubergine - your - potato - wife's - turnip - dead.'

beard1973 · Posted: Thu Oct 27, 2005 2:10 pm Post subject:

Pure White... Wink

_________________

Owen · Posted: Thu Oct 27, 2005 9:00 pm Post subject:

I tthought it was appliance white.

d14vd_h · Posted: Tue Nov 01, 2005 11:50 pm Post subject:

is it just me or does the blue look so dark - i'd be freked out ordering that,

Superkav · Posted: Wed Nov 02, 2005 5:27 pm Post subject:

Could just be your monitor or the way the colour's represented on the scan. trust me, everyone on here with a Blue Tuff has used that paint code.

I did my frame and even matched the new colour with big flakes of the original paint then had a panic attack that it looked too dark!!!!!!
Once I took a pic and compared it on the forum my fears were all put to rest.
_________________
'Tomato - Ted - aubergine - your - potato - wife's - turnip - dead.'

fhmreader · Posted: Sat Nov 05, 2005 7:31 pm Post subject:

Dont put too much faith in the colour chips that you print off. Even the genuine ones I get from my paint manufacturers are never an identicak match for the finished product!!!!

Oh and the black (RAL 9005) for the forks is a semi gloss finish, not matt.

cheers

Mark

tr8theshape · Posted: Thu Dec 15, 2005 3:02 pm Post subject:

Does anyone have the RGB colour values or a Pantone match for RAL5005 (the blue one) ??????

It's doing my head in!! Evil or Very Mad

_________________
Regards,

Dave.

tr8theshape · Posted: Thu Dec 15, 2005 3:21 pm Post subject:

Panic over - found it

http://www.easyrgb.com/

Reckons it's 0,71,133 Very Happy

_________________
Regards,

Dave.

andygti39 · Posted: Fri Jan 06, 2006 1:36 pm Post subject:

i've just had a mk2 burner powdercoated white to turn it into a mag burner and the code i used is ral9010 pure white Very Happy

its a perfect match for the stickers so white in the top post can be updated if you please superkav Very Happy

_________________

BASH COUNTDOWN : 350 DAYS as of sunday

poshbuggers · Burner Fan Joined: 03 Nov 2005 Posts: 3

Sorry to sound stupid but where do I get the paint? Car suppliers or specialists?

jojo · Posted: Wed Aug 02, 2006 3:34 pm Post subject:

powdercoaters Confused

or car body shop Confused

_________________
any one now how to put a mk5 escort cab back together its only in 50brown boxes!!!!!!!!

4 boxes down........................46 ta go
NOW GONE TO THE CRUSHERS HAHAH

capone · Burner Mad Joined: 21 Sep 2006 Posts: 106

Any idea what gold to use for sprying calipers, headset, brake leavers , wheels etc for an MK1 ULTRA ?
There must be a load of ppl done this ?